Hi,
Seems my previous reply did not reach all users. I wrote:
In the "Find and Replace" option type in m2 in the "Find" window, then in
the "Replace" window type in m and then, holding down the Alt key, type in
253 then release the Alt key. This places the ASCI code for supercript 2 in
the Repl
I had a number of files in CorelDraw format (.cdr) which I had opened and
edited in LO. I then saved these as .odg files. This worked fine until I
installed LO 4.2. Since then I have not been able to open either CorelDraw
files nor LO files converted from CorelDraw. LO tries to open the file and
th
I have two columns in calc. Column A has a list of items while column B has
an associated cost. I want to be able to select from column A and have the
item entered into a form (say column X) but I also want to automatically
select the associated cost and have this entered into column Y, alongside
i
Hi,
I am very comfortable with most aspects of LO except Base. I am now
starting to use this option and I find it rather daunting compared to MS
Access (simply because I have used this for years). I am busy with my first
table design and I would like to create two fields as hyperlinks to
externa
Thanks Alex,
I had not planned on getting into macros just yet but maybe this is as
good a time as any. I will work on it and see how far I get.
Paddy
On 8 July 2014 21:41, Alexander Thurgood wrote:
> Le 06/07/2014 16:36, Pat Brown a écrit :
>
> Hi Pat,
>
>
> > I do
Hi,
I have not tried this previously but wish to do so now. My problem is
that I want to export a selection of text in the main document but when I
select "Export as PDF" the 'Range' option is greyed out. I cannot select
anything and the default is 'All'. Is there a setting somewhere that I am
m
gt;> I have tried this on windows (XP) and linux (Fedora) and I can not
>> reproduce it. A couple of basic questions:
>>
>> I am assuming you are talking about a writer document?
>> is the document odf, doc, docx?
>>
>> Cheers
>> On 16/07/14 09:51, Pat Bro
07/15/2014 09:06 PM, Tim Lloyd wrote:
>
>> Hi,
>>
>> I have tried this on windows (XP) and linux (Fedora) and I can not
>> reproduce it. A couple of basic questions:
>>
>> I am assuming you are talking about a writer document?
>> is the document odf, do
Thanks Brian and thanks to everyone else who gave advice. Changing the name
of the config folder did the trick. It now works as it should. I appreciate
the help.
On 16 July 2014 22:42, Pat Brown wrote:
> Where do I find the User Config folder on a Windows machine? Just for
> inter
Hi,
I have a spreadsheet with about 30 tabs (sheets). I want to re-arrange
these. Is there a way to display the list and sort them as I wish without
having to drag each sheet to a new position? I know that excell has the
ability to display the sheets in a list form and one can highlight one of
t
Hi,
In a relationall DB there is a facility to display all the tables and
this also shows how the tables are related and also which fields are
related and how they are related. This is extremely useful to get an
overall pcture of how things fit together and, importantly in this case,
what the ef
Thank you, Paul. I have followed the convolutions of the discussion with
interest but you have more clearly presented what I tried to say in the
beginning. After much of the discussion I now see many of the difficulties
involved but I will follow your suggestion and see if I can phrase this
clearly
Hi Guys,
Is there any way to split a primary (one that has not been 'merged'
previously) cell? I can't seem to find such an option. If there is no
current option then is it technically possible to do so?
Paddy
--
To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org
Problems? ht
August 2014 13:52, Alan B wrote:
> On Sun, Aug 10, 2014 at 7:25 AM, Pat Brown wrote:
>
>> Hi Guys,
>>Is there any way to split a primary (one that has not been 'merged'
>> previously) cell? I can't seem to find such an option. If there is no
>> c
; need to do with these data?
>
> Nino
>
> Am 10.08.2014 13:25, schrieb Pat Brown:
> > Hi Guys,
> >Is there any way to split a primary (one that has not been 'merged'
> > previously) cell? I can't seem to find such an option. If there is no
&g
Just tried the new system and love it. I find it so much easier than
fiddling around with increasing/decreasing sliders. I would like to make a
feature request regarding the tabs. I would like to be able to scroll the
tabs using the mouse wheel. Where can I submit such a request?
--
To unsubscrib
I have a spreadsheet for rainfall data. Each season I have simply copied
everything from the previous season and pasted it into a new sheet and then
edited the charts to read from the new data. Since installing the previous
version of LO I can no longer do this. I double click on the chart and at
t
I have over 2000 records in a sheet. At the beginning of each record there
is a series of numerals. I want to do a Find & Replace to remove these
numerical values but I cannot seem to find the right formula. The leading
numerals are not of consistent length, example
1,1,Guide
1,24,Field
1,225,The M
I was sending a cal document to be printed but the print never went through
and LO hung. I had to close LO down. When I restarted LO I got the message
that there was a file that needed to be recovered. I instructed to start
recovery but it went into working mode and never came out. It is not a big
I received a document which, essentially is a document of song lyrics.
However, they were typed in at random, as they were received. I now want to
sort the songs by song title and can't figure a way to do this. The format
is the following:
The song title, the artist, the lyrics. Each line is essen
Every year I open a new sheet in Calc to record data from a new year. The
layout remains exactly the same each year, only the data changes. The
simplest is to copy the whole of the previous year's sheet and past it into
a new sheet. Then delete all the previous year's data and fill in the new
data.
With most documents it is usually not a problem to select the PDF option
and have it go straight to the printer. However, in Calc especially, one
often wants to only send selected cells to PDF. However there does not seem
to be an option to do this in the same way that one has if one selects the
Pr
Hi,
I was using LO 6.0.2. After a power outage I lost all items in my
Recent Files list in Writer. It started to rebuild the list but got to 2
documents and would not add any more files. It just displayed the same
first 2 files every time I opened LO. I decided to install version 6.0.5
but the
Hi,
I am developing an LO database and I want to open a PDF document from a
button on a Base Form. I want a button on the form that will open a
specific, different PDF document for each record. I want it to open the
document in the default PDF reader? I have not been able to find anything
to hel
Hi,
I have changed my settings to use only the English UK dictionary but
when I open a document it shows the English USA dictionary at the bottom of
the page. How can I change this so that it never uses the USA dictionary?
In fact, how can I delete the USA dictionary so that it is not even
avail
Thank you!
On Fri, 18 Oct 2019, 05:18 Brian Barker, wrote:
> At 23:45 17/10/2019 +0200, Pat Brown wrote:
> >I have changed my settings to use only the English UK dictionary ...
>
> I don't think you have! Language is a property of various parts of
> text within a docume
I have a spreadsheet that includes a column consisting if people's names. I
want to split this into two columns. I want one column with the given names
and the other with their family names. This requires taking the last word
in the column and creating a new column with this word. Is there a way to
Hi,
Currently, if I select Export as PDF, the default folder is my "documents"
folder on the C: drive. This is annoying as I keep having to change it to
the folder I need. Is there any way to set it up so that it automatically
selects the last folder used?
Thanks,
Paddy
--
To unsubscribe e-mail
Hi,
I have a number of rows of text that I want to sort by row. My problem
is that some of the rows are also hyperlinks and when I run the sort it
puts all the hyperlink rows sorted and then the non-hyperlink rows. Is
there any way to get the sort to ignore the hyperlink code?
Thanks,
Paddy
Hi,
I have just installed the latest version of LO but when I opened an .odt
document none of my cross-references work. None of them are greyed out to
indicate they are cross-references. When I hover the cursor over them they
change colour to indicate they are cross-references but when I click on
Hi,
I have just installed the latest version of LO but when I opened an .odt
document none of my cross-references work. None of them are greyed out to
indicate they are cross-references. When I hover the cursor over them they
change colour to indicate they are cross-references but when I click on
Are there any issues with running the latest version of LO on a Win 7
machine?
--
To unsubscribe e-mail to: users+unsubscr...@global.libreoffice.org
Problems? http://www.libreoffice.org/get-help/mailing-lists/how-to-unsubscribe/
Posting guidelines + more: http://wiki.documentfoundation.org/Neti
This is frustrating me no end. I have tried the "Ctrl-Click, Alt-Click"
method, the "Select Cell then move cursor till hand appears", "Click and
hold mouse on cell then drag". None if these work. Is there maybe something
in settings that I need to change? This is only for single cells, multiple
cel
I was able to run LO a few days ago without any problems. Today I tried to
run it and absolutely nothing happened. I am using Windows 11. I was
running LO 25.2.1, which was working fine and then it broke. I tried
checking the Task Manager to see if any LO modules were still running in
the bacground
Thanks Gabriele. After trying a number of the options in Safe Mode I
eventually fixed the problem by doing a factory reset, completely
uninstalling LO, rebooting my PC then installing the latest version
On Fri, 02 May 2025, 17:27 Gabriele Bertolucci, <
gabriele.bertolu...@protonmail.com> wrote:
>
35 matches
Mail list logo
